You can go to my new website by clicking here or by typing the following into your address bar:

www.dernsw.com

Here’s a list of tech terms that are commonly used and their meanings. More words will be added as I hear them.

Airport – This can either be a place where planes take off and land, or the name of the Wireless Router made by Apple computers, but usually when teachers mention an ‘Airport’ when talking about DERNSW, they are referring to any Wireless Access Point, whether it be made by Apple or not.

Commission – Basically the commissioning process is when you type your name in to a  ‘naked’ laptop so it knows it belongs to you. After commissioning, nobody else can log into your laptop using their own login details.

Ethernet – Just a type of wired network. An ethernet cable is just a blue network cable, while an ethernet port is where you plug that blue cable into your computer or network router.

Fibre-Optic - Special cables used for connecting the wireless access points in classrooms to the main server.

Intranet – Different to Internet. Local to your school. Almost like a mini-internet with it’s servers in your school. Sometimes they are kept private and can only be accessed from inside the school, while some schools make them public so you can access them over the Internet.

Moodle – An online application for schools where teachers can post assignments and resources. Ask your computer admin if your school has it.

Re-Image – If your laptop isn’t working properly, or even won’t work at all, you’ll most likely be sent down to the TSO to get it re-imaged. This is where your hard-drive gets wiped and is replaced with the original software that is on all S1′s.

T1 and S1 – The name given to our laptops. Both are the same, but the teachers’ (T1) are black and the students’ (S1) are red.

TSO – Tech Support Officer. Appointed to your school to fix the laptops.

Luckily there’s a simple shortcut built-in to Windows 7 that locks your computer:

Windows Key + L

The Windows Key is that picture of a house between the left Ctrl and Alt keys, and hopefully you know where the L key is.

This takes you back into the log in screen, so you have to put in your password. Do this whenever you leave your computer on it’s own, but you shouldn’t be doing that too much anyway.

I’ve run my own little experiment to see how long it takes to shut down, start up and login using the Shut down and Hibernation methods.

Hibernation is obviously much faster than Shut Down.
Here’s how to hibernate:
Click the start orb on the bottom left hand corner of your screen. Click the arrow next to ‘Shut down’ and select ‘Hibernate’.

Here’s how to get your computer to Hibernate when you close the lid:

Click the battery icon on the bottom right corner of your screen and choose ‘more power options’.

A new window will open up. On the left side panel on this new window, select ‘Choose what closing the lid does’.

Find the drop-down box that’s located next to ‘When I close the lid’ and under ‘On Battery’. From the list of options, choose Hibernate and make sure you save changes.

Now whenever you close the lid, you computer will automatically Hibernate. To switch it back on, just click the power button as you normally would, and you’ll be using your computer again within seconds!

Anyway hopefully I’ll have some new content up soon. Thanks.

We’ll be setting up your main email in such a way that it forwards all your email to your DET email. It still gets filtered by the system. The process is similar for most emails, but I’ve used Gmail.

Log into your Gmail account and go to settings.

Click Forwarding and POP/IMAP.

Enter your DET email address and you are done! Now whatever is sent to your main address is forwarded on to your DET address.

Make sure you have a secure password on your DET email. You don’t want anyone reading emails from your main address!
UPDATE:

If you want to read your DET email from home, you can either log into the DET portal by going here and logging in as usual, or set up your school email to forward to your main address using the same method above (DET emails are based on Gmail, therefore it has most of the same features.)

I’m planning to make video tutorials in the future. Maybe i’ll write some more tutorials when I get bored on the train tomorrow, but I need ideas.

Post a comment here, email me or send me a tweet.

Thanks.

I’ve also changed the theme because the theme I originally used isn’t available on WordPress.com and the one I’m using now seems like it’s much cleaner and simpler. It should also make viewing easier on the small 10″ laptop screens.

Some of the pictures didn’t load properly because they were still hosted on the old site, so I had to re-upload most of them, which was very slow and frustrating. I didn’t re-upload every one of them, though, so if some images won’t load up for you just email me or send me a tweet and i’ll fix it.

From now on, the blog is at www.dernsw.wordpress.com but you can still use www.dernsw.co.cc if you like.

First you need to make your car black and white. Do this by going to Enhance->Convert to Black and White and press OK.

Then you need to copy the picture over to a new layer. Do this by opening the picture in photoshop and by going to Select-> All to select the whole picture, then press Ctrl+C to copy it. Go back to your car then make a new layer by going to Layer->New->Layer and press Ctrl+V to paste your picture on that layer. In part 1 of this tutorial you had to change the blend mode of your new colour layer to ‘Color’. It is almost the same when you use a picture, but this time you have to change the blend mode of the layer to ‘Overlay’. Then you can go and erase the parts you don’t need.

I’ve also set up a redirection URL for the blog, so instead of typing http://www.dascooby.1free.ws/teachertutorials you can just go to www.dernsw.co.cc and it’ll take you to this site.